Cutting, scoring, drilling, and edge finishing tools for working with acrylic sheet, rod, and tube, all from Craftics, made in the USA. Standard woodworking and metal tools crack, chip, and stress-craze acrylic. These are built specifically for plastic: the right rake angles, the right blade geometries, the right feed rates. The difference is visible in the cut.
For scoring and snapping thin sheets: the Plasticutter handles acrylic up to ¼″, with the Gold saber saw blade as the step up for sheet work up to ¼″ and the Green blade for thicker material. For drilling clean holes without cracking: the Pro-Series Plasdrill bits in sizes from ⅛″ to ½″, with a 60° point and 0° rake designed to shear plastic rather than grab it. For edge preparation before gluing or polishing: the Edge Scraper removes saw marks cleanly in a single pass. For polished edges on finished work: the Buffing Kit and Arbor Adapter run on any hand drill or stationary motor.
· Craftics Pro-Series Plastic Drill Bit: ⅛″ to ½″ · 60° point, 0° rake · 8 sizes + 6-piece kit
· Craftics Plasticutter: score-and-snap · sheets up to ¼″ · retractable blade
· Craftics Saber Saw Blades: 2 blades · Gold (up to ¼″) · Green (over ¼″) · straight and curved cuts
· Craftics Edge Scraper: 4 functions · straight, bevel thin, bevel thick, rounded edge · no sanding needed
· Craftics Polishing and Scratch Removal Kit: sandpaper, sanding block, Plasti-Polish, Plasti-Cleaner, polishing cloth
· Craftics Buffing Kit: 4″ cloth wheel + buffing compound · hand drill or stationary motor
· Craftics Arbor Adapter: ¼″ mandrel · mounts Buffing Kit to hand-held drill